Your Google Pixel 10 Pro XL has the best camera system Google has ever shipped, and most cases on the market treat that camera bar like an afterthought. You paid for a flagship, not a phone you have to leave on the towel every time you go near a pool. Water does not wait for a convenient moment, and neither do rainstorms, spilled coffee, or kids with a garden hose.

This case exists because "waterproof" should mean something more than a marketing word on a box. It carries a genuine IP68 rating, a built-in HD screen protector, and full coverage around that camera housing you actually care about.

Why This Case Matters

A lot of cases claim water resistance without ever being tested to a real standard, and that gap is where phones die. IP68 is not a vibe, it is a certification, and this case is rated for submersion to 6.6 feet for up to one hour. That means an accidental drop in the pool, a soaked pocket in a downpour, or a knocked-over glass of water is a non-event instead of a repair bill.

Redpepper Cases built this specifically for the 6.8-inch Pixel 10 Pro XL, so every cutout, seam, and seal is sized for your exact phone. You get real protection, not a loose approximation borrowed from a similar-sized device.

Water damage is also one of the few phone disasters insurance and warranties love to argue about, since liquid damage indicators make claims messy fast. A sealed, certified case sidesteps that entire conversation before it starts. Instead of hoping you dry your phone out in rice and praying, you simply keep living your life near water the way you always wanted to.

Key Features Breakdown

The IP68 rating is the headline, but the details are what make this case worth your money. Here is what you are actually getting when you snap this case onto your Pixel 10 Pro XL.

Genuine IP68 waterproof rating. This is a certified rating, not a guess, tested for underwater use to 6.6 feet for up to one hour. Rain, pool splashes, and dropped-in-the-sink moments are all covered. You still want to towel it off and check the seal before intentional submersion, but the protection is real.

Built-in HD screen protector. The front cover has a screen protector permanently integrated into it, so there is no separate film to buy, align, or air-bubble your way through. Your display stays sealed against water and dust while remaining clear and responsive to touch. One less thing to shop for, one less thing to mess up during installation.

Clear back panel with full-body coverage. You still get to show off the Pixel 10 Pro XL's design through a clear back cover, while the sealed front and back pieces snap together to protect the corners, edges, and that camera bar from drops and scrapes. Full coverage does not have to mean hiding the phone you paid for.

Wireless charging and fingerprint compatible. Wireless charging works normally with the case installed, so you do not need to strip it off every night. The fingerprint reader also works through the built-in protector, though you will need to re-register your fingerprint once after installing the case so the sensor recalibrates to the new surface.

Two-piece snap-together design. Installation is a snap-the-back-on, snap-the-front-on process with no adhesive and no special tools. That also means removal is just as easy when you want to clean it or check the seal.

Precise cutouts for full function. Every port, button, speaker, and the entire camera array has an exact cutout instead of a generic guess. You keep full access to charging, volume controls, and microphones without pulling the case off for basic tasks. Nothing about the phone's normal function gets sacrificed for the sake of the seal.

Who This Case Is For

This case is built for anyone whose Pixel 10 Pro XL spends real time near water, whether that is intentional or not. Think beach trips, boat days, poolside lounging, hiking in unpredictable weather, or just living somewhere it rains sideways half the year. It also makes sense for parents handing a phone to kids near a pool, service workers who need their phone functional in wet job sites, and anyone who has already learned the hard way what a liquid damage indicator looks like.

If you have ever set your phone down a little too close to a puddle and felt your stomach drop, this case is for you.

It is not the case for someone who wants the thinnest possible profile or is never within ten feet of a body of water. Waterproof protection means a slightly thicker shell than a minimalist clear case, and that is the tradeoff you are making on purpose. If that tradeoff sounds reasonable, you are exactly who this case was designed for.

Photographers who shoot the Pixel 10 Pro XL's camera in tough conditions also belong on this list, since fog, rain, and splashes stop being a reason to pack up early. Commuters walking through unpredictable weather get the same peace of mind without carrying an umbrella just for their phone. Even people who simply drop their phone in the sink more often than they would like to admit will find this case pays for itself the first time it happens.

Technical Details

This case is made specifically for the Google Pixel 10 Pro XL at 6.8 inches, and it is not compatible with the standard Pixel 10 or the smaller 6.3-inch Pixel 10 Pro. It carries an IP68 rating for dust and water resistance, tested to 6.6 feet underwater for up to one hour. The front cover includes a built-in HD screen protector, and the back cover is clear to show off the phone underneath.

Precise cutouts keep every port, button, and the camera array fully accessible. The case is available in Black and Blue, and it ships with a carrying strap along with the two-piece snap-together shell. You can browse the full listing and current pricing on the product page.

Customer Story: The Lake House Regular

Maria spends every summer weekend at her family's lake house, and every summer weekend used to mean the same routine: leave the phone inside, miss the photos, check on it constantly from shore. She upgraded to a Pixel 10 Pro XL specifically for the camera, and then realized she had no way to actually use it near the water without risking the phone entirely. A friend pointed her toward this waterproof case, and she was skeptical about the IP68 claim until she tested it herself in a bucket before trusting it on the dock.

The case held up exactly as advertised. Maria has since dropped her phone off the side of the kayak twice, both times fishing it out within seconds and finding it completely dry and functional. She still shoots wakeboarding videos and sunset photos from the water instead of the shoreline, something she never risked with her old setup.

The built-in screen protector means she never worries about swapping a soggy or scratched screen film mid-summer, and the wireless charging pad at the lake house still works fine through the case at night.

By the end of that first summer, Maria had stopped thinking about the case at all, which is really the point. She was not babysitting her phone from the shore or wrapping it in a plastic bag before every boat ride. Her Pixel 10 Pro XL just worked, wet dock and all, and that quiet confidence is what she tells every friend who asks about it now.

Protection Tips from the Pepper Crew

Even a genuine IP68 case works best when you treat it right, so here is what we recommend to get the most out of it.

• Always check that both the front and back covers are fully snapped and seated before any water exposure, since a partial seal defeats the purpose.
• Rinse the case with fresh water after exposure to salt water, chlorine, or sand to prevent grit from working into the seal over time.
• Dry the case fully, inside the seams and around the buttons, before you set your phone down on fabric or in a bag.
• Inspect the seal periodically for debris, hair, or wear, and do not push your luck if you notice a gap.
• Stay within the tested limits: 6.6 feet deep, one hour max, and treat anything beyond that as unverified territory.
• Re-register your fingerprint after installing the case so the sensor reads accurately through the built-in protector.
• Keep the carrying strap attached during water activities so a slippery, wet grip does not turn into a lost phone.

What's in the Box and How to Install

Your order includes one two-piece snap-together waterproof case sized for the Google Pixel 10 Pro XL, complete with the built-in HD screen protector on the front cover, plus a carrying strap. Installation starts with the back cover: place your phone into the clear back panel and make sure it sits flush against every edge. Next, align the front cover, which includes the screen protector, over the display and press down evenly around all sides until you hear or feel it fully seat into place.

Before your first water exposure, run your finger around the entire seam checking for gaps, and give the whole case a quick test in a sink of water before you trust it at the pool.

Frequently Asked Questions

1. Is this made for the Pixel 10 Pro XL specifically?
Yes, this case is sized for the 6.8-inch Pixel 10 Pro XL and is built around its exact dimensions and camera layout. It is not compatible with the standard Pixel 10 or the smaller 6.3-inch Pixel 10 Pro. Always confirm your exact model before ordering to guarantee a proper seal and fit.

2. Is this case actually waterproof?
Yes, it carries a genuine IP68 rating, which means it has been tested for underwater use to a depth of 6.6 feet for up to one hour. That is a certified standard, not a marketing claim without testing behind it. Stay within those limits for reliable protection.

3. What colors does it come in?
This case is available in Black and Blue, both featuring the same clear back panel that shows off your Pixel 10 Pro XL. Both colorways include the identical IP68 protection and built-in screen protector. Pick whichever matches your style, since the protection level does not change.

4. Does it come with a screen protector included?
Yes, an HD screen protector is permanently built into the front cover, so there is nothing separate to purchase or apply. It is sealed as part of the case for consistent water and dust protection. You get full display coverage without a second product to install.

5. Will my fingerprint sensor still work with this case on?
Yes, the fingerprint reader functions through the built-in screen protector. You will need to re-register your fingerprint in your phone's settings once after installing the case. This lets the sensor recalibrate to the slightly different surface and keeps unlock speeds accurate.

6. Does wireless charging work with this case installed?
Yes, wireless charging works normally with the case on, so there is no need to remove it for overnight charging. The case is designed to allow charging coils to communicate through the shell without interference. Just make sure the phone is centered on your charging pad as usual.

7. How do I install the case correctly?
Snap the back cover into place first, making sure your phone sits flush against every edge. Then align the front cover, which includes the built-in screen protector, and press evenly around all sides until fully seated. Check the entire seam for gaps before any water exposure.

8. Does this case protect the camera bar?
Yes, the sealed front and back covers fully enclose the camera housing, protecting it from drops, scratches, and water intrusion. This was a priority in the design given how prominent the camera bar is on the Pixel 10 Pro XL. You get full coverage without blocking any lens.

9. Is this case bulky compared to a regular case?
It is thicker than a minimalist clear case because it is built for genuine waterproof sealing. Most Pepper Fam members find the tradeoff worth it once they realize what it protects against. It still stays reasonably compact for daily carry and slides into most pockets and bags.

10. Can I use it while swimming or at the pool?
The IP68 rating covers submersion to 6.6 feet for up to one hour, which comfortably handles typical pool and swimming scenarios. Always check that the seal is fully closed before entering the water. Avoid exceeding the tested depth or duration for reliable results.

11. Does the built-in screen protector affect touch sensitivity?
No, the screen protector is designed to maintain normal touch response and display clarity. You should not notice any lag or reduced accuracy when typing, swiping, or using the camera app. Display sharpness also remains largely unaffected under normal use.

12. How do I clean the case?
Rinse the case with fresh water after any exposure to salt water, chlorine, or sand, since debris can work into the seal over time. Dry it thoroughly with a soft cloth afterward, including around the seams and buttons. Regular rinsing keeps the seal performing as intended.

13. Does the case block any ports, buttons, or the camera?
No, every port, button, and the full camera array has a precise cutout so nothing is obstructed. You retain full access to charging ports, volume controls, and the power button. The camera cutout is aligned exactly to the Pixel 10 Pro XL's array for clear, unobstructed photos.

14. Can I remove the case easily if I need to?
Yes, the two-piece design snaps apart without adhesive or special tools required. You can separate the front and back covers whenever you need to clean the case or inspect the seal. Reinstalling is just as simple as the original setup.

15. What should I do if the seal wears out over time?
Inspect the seal periodically for visible gaps, debris, or wear, especially after months of regular water exposure. Avoid submerging the case if you notice any issues until you have confirmed the seal is intact. Treating the seal as a wear item helps you catch problems before they cause water damage.

Final Verdict: Is This the Right Case for You?

If your Pixel 10 Pro XL spends any real time around water, rain, or unpredictable weather, this case solves a problem that most cases simply ignore. You get a certified IP68 rating, a built-in screen protector that removes an entire extra purchase, and full coverage for the camera bar you actually paid a premium for. The Pepper Fam keeps coming back to this one because it does exactly what it claims, with testing to back it up instead of vague marketing language.

Head over to the Pixel 10 Pro XL waterproof case page and stop treating your phone like it is made of sugar. Grab it in Black or Blue, snap it on, and get back to living your life near the water instead of watching from the towel.

Your next pool day, rainstorm, or lake weekend is already covered, and you can order the case here before your next trip.